Table of Contents
Advertisement
7-2
Unpacking the printer
Select a site that meets the requirements described in
page
You need scissors or another cutting device to unpack the printer.
i
Make sure you have one or more people to assist with unpacking the printer.
Unpack the printer
1
2
3
4
!
5
6
7
6-1. Unpack the printer, following these steps.
Place the shipping carton on a firm level surface.
Use a scissors to open the taped area of the shipping carton.
Open the shipping carton (step 1 in
1
Figure 7-1: Unpack the printer
Remove the Quick Install Chart and the accessories bag (steps 2 and 3 in
Figure
7-1). The options included with the printer are checked on the chart.
The printer weighs 21 to 26.5 pounds (9.7. to 11.9 kg). Use proper lifting
techniques. Make sure you have enough people to lift the printer comfortably.
Lift off the front and back shipping supports (step 4 in
aside.
Lift the printer from the carton and place it on a counter or other solid surface.
(The bottom shipping supports remain in the carton.)
Remove the printer from the plastic bag.
i
Save all packing material, including the plastic bag, shipping carton, shipping
supports, and accessories bag.
"Before you install" on
Figure
7-1).
2
4
3
1
User's Guide for Select™ Platinum Series™ Printers
Install the printer
1
Figure
7-1) and set them
Advertisement
Table of Contents
