Status Light - DataCard select series User Manual

Using the printer

Status light

The front corner of the printer has a light that provides information about the printer's
current state.
Status Light
Red Amber Green
Steady green
Blinking green
Steady amber
Blinking amber
Steady red
Off
#. If the light blinks amber but no message appears on the PC, the
following might have occurred:
* You used the Power-on/Ready sequence to print a test card. Messages
are not reported.
* You changed the name of the printer driver. Power the PC off and on.
User's Guide for Select™ Platinum Series™ Printers
Status light
Figure 2-11: Status light
Description
The printer is starting. The printer displays colors
repeatedly while it initializes.
The printer is ready and waiting to print cards.
The printer is busy printing cards.
The printer is paused without an error.
If the light remains steady amber during power-
up, the printer has a problem that requires
service.
The printer has issued a message. See the PC
#
for the message.
The printer has a problem that requires service.
The printer power is off.
2-9