Restoring The Restraint - Britax Maxi AHR Easy Adjust Instructions For Installation And Use Manual

HOW TO INSTALL WITH A CHILD HARNESS
TO REMOVE CHILD FROM HARNESS AND SEAT
H. Disengage seat belt tongue and
buckle, remove the lap portion of seat
belt from the SLIDEGUARD™Converter
and remove the Child Harness and
seatbelt from child.
NOTE: It may be easier to unthread the car
seat belt out of the loops before lifting the
child harness over the child's head.
NOTE: Do not pass the child harness
over the headrest once the child has
outgrown the top most headrest position
as this can damage the headrest parts.
NOTE: Cease using this child restraint
when the child's shoulders reach the
Upper Shoulder Height Marker with the
headrest in the top position.
52 Instructions for Installation & Use - Series No. 8100/A/2010
Lift child harness strap
over child's head.

RESTORING THE RESTRAINT

RESTORING THE HARNESS
A. Remove the elastic loops holding the cover in place
at the lower front of the seat. Lift the cover to expose
the storage inserts in the seat base.
B. Place shoulder straps in front of cover and slide the
tongues up.
Instructions for Installation & Use - Series No. 8100/A/2010
A
B
53