Table of Contents
Advertisement
HOW TO SET-UP
IMPORTANT: ALWAYS USE THE SLIDEGUARD™ CONVERTER
IMPORTANT:
You must adjust the crotch strap to the correct length for your child before installing the restraint
as it cannot be adjusted in the car.
The crotch strap should only be extended if the buckle and SLIDEGUARD™ Converter are located
too low against your child's legs, causing discomfort.
Always return the crotch strap to its original shorter length when using the seat with a smaller
child.
The buckle SLIDEGUARD™Converter should always be positioned low down on your child's body.
DO NOT attempt to remove the crotch strap from the adjuster.
WARNING:
A sash belt under the arm or behind the back is dangerous.
32
Instructions for Installation & Use - Series No. 8100/A/2010
SETTING UP THE SLIDEGUARD™ CLIP POSITION
NOTE: The SLIDEGUARD™ Clip ensures that the child does not slump and
ensures the lap belt is always positioned on the child's hips and thighs. If the
seat belt rides up on to the stomach then a child can be seriously injured in a
crash.
A. Sit the restraint against a wall for stability and get the child to sit comfortably in position.
B. Determine the correct buckle position. The bottom edge of the buckle needs to be level with the top
of the legs.
SLIDEGUARD™ Clip
Position
TOO HIGH
C. Remove the child and adjust the buckle strap length as on the next page.
Instructions for Installation & Use - Series No. 8100/A/2010
HOW TO USE
SLIDEGUARD™ Clip
Position
OK
Center of button on
buckle, level with top
of legs (with all slack
removed from crotch
strap.)
33
Hide quick links:
Advertisement
Table of Contents
