Palm Treo 750v User Manual page 18

1
S E T T I N G U P
BEFORE YOU BEGIN
battery is inserted before you charge. If you
connect your smartphone to a power
source without the battery inserted,
nothing happens.
1 Prepare the AC charger by inserting the
adapter that fits the wall outlet you're
going to use.
2 Plug the AC charger into a wall outlet.
3 With the arrow on the connector facing
up (toward your smartphone screen),
connect the charger cable to the bottom
of your smartphone.
10
C H A R G I N G T H E B A T T E R Y
Make sure the
Indicator light
4 Check the indicator light to confirm that
your smartphone is being charged.
Solid red indicates that your
•
smartphone is being charged.
Solid green indicates that your
•
smartphone is fully charged.
If the battery is low, the
?
DID YOU KNOW
indicator light flashes red.
When your smartphone is on (see Turning
your smartphone on/off), the onscreen
battery icon displays the charging status:
A solid lightning bolt indicates that
the battery is connected to a wall
outlet and is charging.
A shaded lightning bolt indicates
that the battery is connected to a
wall outlet and is fully charged.
A partial battery without a lightning
bolt indicates that the battery is not
connected to a wall outlet and that
it has some power.
An exclamation point (
that the battery needs to be
charged immediately.
!
) indicates