Konica Minolta bizhub pro 920 Copier Manual page 72

3
Equipment
Post inserter PI-501
Z folding unit ZU-602
Trimmer unit TU-501
Reminder
Be sure to use paper only of the size specified for the tray, especially
when specified as one of the sizes in Original Size Detection, Custom, or
Wide Paper.
Note
If any size other than A4 (LU-403)/ A3 (LU-404) is desired, contact your
service representative.
Detailed information of paper sizes are:
F4: 8"×13" (203 × 330 mm)
A3: 11.69"×16.54" (297 × 420 mm)
B4: 10.12"×14.33" (257 × 364 mm)
A4: 8.27"×11.69" (210 × 297 mm)
B5: 7.17"×10.11" (182 × 257 mm)
A5: 5.85"×8.27" (148 × 210 mm)
!
Detail
When setting wide size to the Multi-sheet bypass tray, be sure to specify
the precise dimensions of paper to be used. See page 9-15 for details.
3-8
Paper and Original Information
Available sizes
Max. 12.36"×18.11" (314 × 460 mm) ~ A5
• Upper tray detection size: 8.5"×11", 8.5"×11"R,
5.5"×8.5", A4, B5, B5R
Detects A5 instead of 5.5"×8.5", A4R instead of
8.5"×11"R
• Lower tray detection size: 11"×17", 8.5"×14", 8.5"×11",
8.5"×11"R, 5.5"×8.5", A3, B4, A4, B5, B5R
Detects A5 instead of 5.5"×8.5", A4R instead of
8.5"×11"R, and 8"×13"/8.12"×13.2"/8.25"×13"/
8.5"×13" instead of 8.5"×14.
Punch mode: 11"×17", 8.5"×11"
Z-fold mode: 11"×17" (z-fold), 8.5"×11" (double-fold)
All other paper sizes will be output without z-fold/double-
fold.
11"×17", 8.5"×14", 8.5"×11"R, A4R and those wide sizes
bizhub PRO 920