Finishing; Job List - Konica Minolta bizhub pro 920 Copier Manual

Before Making Copies
• Image Overlay
Scans an original image and overlays it on the pages of another document.
For example, you may want to incorporate a page heading, graphic design
or logo into the pages of your document.
• Program Image Overlay
Same as for "Overlay" except the overlay image is stored in memory.

Finishing

• Duplex Bind
Makes double-sided copies upside down on the reverse side from normal
originals.
• Output for Machine with Finisher FS-509/FS-516/FS-604 Installed:
Sort, Group, Offset and Staple modes using the Primary (main) tray
Sort and Group modes using the Secondary (sub) tray
Selects an output tray and output mode on the Finishing popup menu.
• Half Fold, Fold&Staple, Trimming (FS-604 with Trimmer Unit TU-501)
Folds output copies in the center to make a booklet. Use Fold&Staple to sta-
ple in the center, and/or use Trimming to trim the end of booklets.
• Punch (Punch Kit PK-505, Z Folding Unit ZU-602)
Makes file holes in output copies.
• Z-Fold, Letter Fold In, Letter Fold Out (Finisher FS-604, Z Folding Unit
ZU-602)
Makes zigzag-folded copies (Z-Fold), or folds copied set in three (Letter Fold
In, Letter Fold Out).
• Cover Sheet Feeding (Finisher FS-509/FS-516/FS-604 with Post Insert-
er PI-501)
Attaches thick covers or insertions to output copies.
• Manual Finishing (Finisher FS-509/FS-516/FS-604 with Post Inserter PI-
501)
Manually staples/punches/folds paper sets without printing.
• Tandem Mode
Works in tandem to distribute a large copying job in half the time of non-tan-
dem mode.

Job List

• Job List
Displays the Job List Screen to view the output/send history, check the in-
complete/suspended jobs, or to manage current and reserve jobs.
bizhub PRO 920
8
8-5