Copying Using Special Paper (Bypass Tray Setting) - Konica Minolta bizhub pro 920 Copier Manual

Basic Job Settings

Copying Using Special Paper (Bypass Tray Setting)

Use the Multi-sheet bypass tray to copy using the special paper type or size.
The following settings are provided:
- Paper type: - (blank), Normal, Thick, Thin Paper, OHP Paper, Trace, User
- Original Size Detection: Sets the machine to detect a specific paper size
instead of the size normally to be detected; namely, A5 instead of
5.5"×8.5", A4R instead of 8.5"×11"R, 8"×13"/8.12"×13.2"/8.25"×13"/
8.5"×13" instead of 8.5"×14", and A5R/B6R instead of 5.5"×8.5"R.
- Paper size: Standard, Custom, Wide Paper, Tab Paper
!
Detail
Special paper can also be loaded in the main body tray or in the LCU to
use on a regular basis. See page 1-2 of POD Administrator's reference.
For specifications of special paper to be loaded in the Multi-sheet bypass
tray, see page 3-9.
For details on loading paper in the Multi-sheet bypass tray, see page 4-6.
Reminder
When setting wide size, be sure to specify the precise dimensions of pa-
per to be used. The dimensions of the wide size selected on the Wide
Size Paper Screen are not correctly set in the initial setting.
bizhub PRO 920
9
9-15