Konica Minolta bizhub pro 920 Copier Manual page 83

Supplies & Handling
3
Place paper on the tray with any curl turning up, then move the side
guide plates and rear guide to the edge of the paper.
– Load paper aligning it to the paper feed roller side of the tray.
Press the release knob of the front side guide plate to move the side
guide plates, and also move the rear guide to the edge of the paper.
4
When paper is seated properly, close the paper feed roller.
5
Push in the tray until it locks into place.
Reminder
Be sure to fan paper before loading; it may improve feeding ability of the
machine.
Do not load above the limit level indicated on the side guide plate.
Be sure that the side guide plates and rear guide are securely aligned to
the paper; otherwise the machine cannot detect the correct paper size,
or machine trouble may occur.
Do not bump the tray into the main body; otherwise machine trouble may
be caused.
!
Detail
Changing paper size of the main body tray does not require any specific
setting change, if standard size has been specified for that tray. if not, en-
ter the Utility Screen to change the size setting. See page 1-2 of POD Ad-
ministrator's reference.
bizhub PRO 920
4
4-5