Konica Minolta bizhub pro 920 Copier Manual page 303

Applications
– Touch [Set Numbering Type], then select the desired numbering
type on the subsequent screen. Touch [OK] to restore the previous
screen.
– Touch the desired printing position in the printing position area. If
fine adjustment is needed, touch [Fine Adjustment] to display the
Fine Adjustment Screen. See page 11-74 for details.
– Touch [Character Size] to select 20 point or 36 point.
– Touch [Print Page] to designate whether to print the selected stamp
on the cover only or on all pages.
– Touch [Start Number] to designate the starting number, if required.
Use the touch panel keypad or up/down arrow key to enter the de-
sired starting number, then touch [OK] to return to the previous
screen.
bizhub PRO 920
11
11-69