Selecting Finishing Settings - Konica Minolta bizhub c252 User Manual

Using copy functions
2.9

Selecting Finishing settings

Various settings can be selected for sorting and
finishing copies fed into the copy output tray.
The following Finishing settings are available.
Setting
Sort
Group
*1
Offset
Corner Staple
*2
2 Staples
2/3/4-hole
*3
Punch
C252
Description
Select this setting to separate each set of a
multi-page document.
Select this setting to separate the copies of
each page in a multi-page document.
Select this setting to feed out and sort
printed copies in an alternating crisscross
pattern if the sorting conditions are met when
no finisher is installed.
Select this setting to feed out and stack the
printed copies on top of each other with each
set shifted to separate it when a finisher is
installed.
*2
Select this setting to bind the printed copies
with a staple in the corner.
Select this setting to bind the printed copies
with two staples.
Select this setting to punch holes (2, 3 or 4
holes) in the printed copies for filing them.
2
2-27