Product Ecology Requirements - Intel SS4000-E Technical Product Specification

Regulatory Information Intel® Entry Storage System SS4000-E
All peripheral devices, such as CD ROMS, Disk drives, Tape drives shall have the following
certifications: UL or CSA NRTL, CSA or cUL, and TUV or VDE and SEMKO or NEMKO or
DEMKO or FIMKO, CE, and FCC.
All Fans shall have the minimum certifications: UL and TUV or VDE
All current limiting devices shall have UL and TUV or VDE certifications and shall be suitable
rated for the application where the device in its application complies with IEC60950.
All lithium batteries shall be UL recognized and battery circuits are to have suitable reverse bias
current protection for the application it is used in.
All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved printed
wiring board manufacturer.
All connectors shall be UL recognized and have a UL flame rating of UL94V-0.
All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer. SELV
Cable to be rated minimum 80 V.
All plastics used must be made of a UL recognized material, and have the appropriate flame
ratings mandated by IEC60950 per system level requirements. All plastics parts shall be
manufactured by an UL approved fabricator and the parts shall be marked with the appropriate
UL traceability markings. Markings to include:
Plastic Fabricators name and/or UL Fabricator ID
Material Name (for example GE, C2800)
Date Code
Product safety label must be printed on UL approved label stock and printer ribbon. Alternatively
labels can be purchased from a UL approved label manufacturer.
The product must be marked with the correct regulatory markings to support the certifications
that are specified.
Product documentation shall incorporate all safety required information to conform to certifiers
and regulators and the certifications issued for the product.
6.2.1.1

Product Ecology Requirements

All materials, parts and subassemblies must not contain restricted materials as defined in Intel's
Environmental Product Content Specification of Suppliers and Outsourced Manufacturers –
http://supplier.intel.com/ehs/environmental.htm.
All plastic parts shall not use brominated flame retardant or any other halogenated retardants
that are not accepted by environmental programs such as Blue Angels, Nordic White Swan, and
Swedish TCO.
All plastic parts that weigh >25gm shall be marked with the ISO11469 requirements for
recycling. Example >PC/ABS< .
Packaging materials may not contain more than 100 ppm (total) of lead, cadmium, chromium or
mercury.
If sold as a retail product, packaging materials must be marked with applicable recycling logos
for Europe (green dot) and Japan (Eco-marks).
Product documentation shall incorporate all safety required information to conform to certifiers
and regulators and the certifications issued for the product.
All cords and cables shall contain < 100 ppm of cadmium.
European Restriction of Hazardous Substances (RoHS)
Intel has a system in place to restrict the use of banned substances in accordance with the
European Directive 2002/95/EC. Compliance is based on declaration that materials banned in
the RoHS Directive are either (1) below all applicable substance threshold limits or (2) an
approved/pending RoHS exemption applies.
38 Revision 1.2