System Interconnection; Chassis Internal Connectors; I/O Panel Connectors; Figure 18. Chassis Rear I/O Connectors - Intel SS4000-E Technical Product Specification

Intel® Entry Storage System SS4000-E
5.

System Interconnection

5.1

Chassis Internal Connectors

There are four Serial ATA (SATA) connectors on the backplane that the hard drives connect to.
The backplane is connected to the motherboard via a PCI-Express connector that is used only
as a connector for the particular signals used.
•
The backplane supports the four expansion drives and provides the interconnect
between the backplane and the SATA controller on the motherboard.
5.2

I/O Panel Connectors

®
The Intel Entry Storage System SS4000-E provides an aperture for the rear I/O ports. The
following are the I/O ports available:
•
Two RJ-45 LAN connectors
•
Two USB 2.0 ports
Revision 1.2
A USB Ports
B Ethernet Ports

Figure 18. Chassis Rear I/O Connectors

System Interconnection
31