Feature Summary
1.8.1 Front/Rear Panel Controls and Indicators
The front/rear panel controls and indicators are defined below:
Power button (front)
Reset button (rear)
Power
System Status
NIC1 Link
NIC1 Activity
NIC2 Link
NIC2 Activity
Global Disk Activity
14
Table 3. Front and Rear Control Button Functions
Toggles the system power on/off.
Holding button down will shut the system down.
Reboots the system and resets the Ethernet ports to default values (DHCP
client) and the Administrator password to default values.
Table 4. Front Panel LED Indicators
Continuous green light indicates the system has power applied to it.
No light indicates the system does not have power applied to it.
Continuous green indicates system is running and operating normally.
Green blinking light indicates system is in process of booting up or shutting down.
Continuous amber light indicates fault present – a critical or non-recoverable
condition.
Continuous green indicates an active Ethernet connection.
Off indicates no active Ethernet connection.
Blinking green indicates Ethernet activity.
Continuous green indicates an active Ethernet connection.
Off indicates no active Ethernet connection.
Blinking green indicates Ethernet activity.
Continuous green light indicates drive health is good (1-4 drives).
Amber blinking light indicates one or more drives are rebuilding.
Intel® Entry Storage System SS4000-E
Revision 1.2