To Re-Load A Stitch Program; Program Pop-Up Messages - Husqvarna Viking Designer Ruby Deluxe User Manual

To re-load a sTiTCh prograM

If Sewing Mode is active when closing the Program mode,
your stitch program will be loaded to Sewing Mode and
is ready to be sewn. If selecting another stitch in Sewing
Mode and then re-opening the Program mode, your stitch
program will remain unchanged. Every time Program
mode is closed, the stitch program will be loaded to Sewing
Mode.
If Embroidery Mode is active, your stitch program will be
loaded to Embroidery Edit as a design. If you want to Edit
your Stitch, touch the Edit Stitch icon.

prograM pop-Up Messages

not a programmable stitch
Some stitches are not possible to insert in a stitch program,
for example buttonholes and four direction stitches.
stitch program out of range
The stitch you are trying to add will make the stitch
program too long.
Your stitch program can be up to approximately 500mm
(20") long and contain up to 99 stitches. If the stitch
program exceeds the maximum length this pop-up message
will let you know.
5:6