Husqvarna Viking Designer Ruby Deluxe User Manual page 9

edging foot J
This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width
of 5.0 and 5.5 mm. Stitches form over the pin which prevents puckering at the edge of the
fabric.
Quilter's 1/4" piecing foot p
This foot is used when piecing quilt blocks. The foot has distance guidelines marks 1/4"
(6 mm) and 1/8" (3 mm) from the needle.
embroidery/darning foot r
This foot is used for free motion embroidery/quilting/stitching and hoop embroidery.
side Motion foot s
7
This foot is used for side-motion/Omnimotion stitches.
decorative stitch foot b Transparent
7
A clear foot for decorative sewing makes it easy to match stitches. Same tunnel on the
underside as Presser Foot B.
sensor one-step buttonhole foot
Plug into the machine then enter the desired buttonhole length to sew Sensor One-Step
7
Buttonholes. The middle mark measures a 5/8" (15 mm) from fabric edge.
self-adhesive glide plates
Used for Presser Foot C/Sensor One-Step Buttonhole Foot when sewing buttonholes on
plastic-coated fabrics, leather, etc.
sensor Q-foot
The Sensor Q-foot is always recommended for embroidery.
This foot is also used for Free Motion sewing, quilting and embroidering on especially thick
or spongy fabric. When using the Sensor Q-foot for Free Motion, select Free Motion Spring
Action in the Free Motion Technique pop-up in Sewing Mode.
G 1:9
ettinG to know your machine