deLuxe
stitch system
™
The deLuxe™ Stitch System has two ways to control the
needle thread: Thread Tension and Thread Portioning.
When activated, the machine will automatically use Thread
Portioning if possible. Depending on your other settings,
the machine will automatically use Thread Tension in some
cases, e.g. when Free Motion is active.
Certain optional accessories or special techniques may
require the use of Thread Tension for best results. Deselect
the deLuxe
Stitch System icon to switch to Thread
™
Tension.
Read more about the deLuxe
presser foot height for embroidery
Adjust the height of the presser foot in embroidery stitch-
out mode.
Some embroideries may build up under the presser foot.
If there is not enough space between the presser foot and
the embroidery, the top thread will form loops on the
underside of the embroidery. Increase the presser foot
height in small steps until the embroidery moves freely
under the presser foot.
3:10
Stitch System on page 4:9.
™
Presser Foot Height
for Embroidery