Husqvarna Viking Designer Ruby Deluxe User Manual page 39

Tension/portioning Compensations
If you find that the Thread Tension/Thread Portioning
needs to be increased or decreased for most stitches or
embroideries, you can change the general setting for
embroidering and/or sewing. You may need to adjust the
Thread Tension/Thread Portioning controls when you
regularly sew or embroider on a special fabric or use a
specialty thread.
Touch Tension/Portioning Compensations. Adjust the
slider bars to generally decrease or increase the Thread
Tension/Thread Portioning for all stitches and/or
embroidery. Default setting is Normal.
Once you have increased or decreased the value in the
Settings menu, the Thread Tension control icon or Thread
Portioning control icon will change to red.
Note: Contact you authorized HUSQVARNA VIKING
if you experience Thread Tension/Thread Portioning problems that
cannot be helped with the Tension/Portioning Compensations.
sensor Q-foot for embroidery
The Sensor Q-foot for embroidery is active by default
when you turn on the machine.
The Sensor Q-foot is always recommended for embroidery.
When using another type of foot, e.g., the R-foot,
deactivate Sensor Q-foot for embroidery. The deLuxe
Stitch System will then use Thread Tension instead of
Thread Portioning.
dealer
®
™
S & F
ettingS unctionS
3:9