Husqvarna Viking Designer Ruby Deluxe User Manual page 94

how To Use design posiTioning
Stitch out design DRL_069.vp3 in a large hoop. Touch
Design Positioning icon to position the next design.
design positioning wizard
Touch the numbered Design Positioning icons to position
your design step by step. For information about a step,
touch Quick Help and the numbered icon.
1. To select a locking point on screen
Touch number 1 to select a locking point. Place the red
cursor where you would like the locking point to be in your
embroidery.
2. Move locked point on fabric
Touch number 2. The red cursor will be locked on the
screen. It will change color from red to grey with a ring
around the center of the locking point. Now you can place
the design exactly where you want it on the fabric by using
the stylus or the Control. Watch the hoop as it moves when
you use the arrows to get the design placed exactly where
you want it. The position of the needle will show where the
locking point will be placed on the fabric. Use the Control
to fine tune.
Note: If you are happy with the placement of your design, touch OK
in the bottom right corner. If you also need to adjust the angle of the
design, continue with step 3.
3. set Matching point on screen
Touch number 3 to activate the matching point. You can
to check a second position within the design to make
sure your design is lined up properly and make further
adjustments if necessary.
Watch the cursor on the screen to select a matching point.
Place the red cursor where you would like the matching
point to be in your embroidery. The hoop will move,
so that the needle indicates the matching point. Use the
Control to fine tune.
4. rotate design on fabric
Touch number 4. The rotate function is automatically
selected. Use the stylus or Control to rotate the design
around the locking point. Look at your fabric and rotate
the design until the needle is exactly where you want the
matching point. Touch OK.
8:4
Design Positioning
Wizard – Steps 1-4
1
2
3
4