Environment Required For Using The Scan Functions - Konica Minolta bizhub C450 Network Scanner Operations

Before using the scan functions
2 Before using the scan functions
2.1

Environment required for using the scan functions

The following conditions are required to use the network and scanning
functions of this machine.
- The machine is connected to the network. (required)
The functions can be used over a TCP/IP network. For details on the
connection, refer to "Connecting to the network" on page 2-13. Also,
network parameters such as the IP address of this machine must be
specified in order to use the machine on the network. For details, refer to
"Settings for using network/scanning functions" on page 2-9.
- The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated
KONICA MINOLTA TWAIN must be installed. For details, refer to the
TWAIN driver manual that is on the User Software CD-ROM.
bizhub C450 (Phase3)
2
2-3