3
To search the destination
1
Touch [Scan Settings], and then specify the scan settings.
–
For details on the scan settings, refer to "Specifying the scan
settings" on page 3-48.
2
After specifying the settings, touch [OK].
3
Load the document into the ADF or position it on the original glass of
the machine.
4
Press the [Start] key on the control panel.
The document is scanned, and the data is sent.
Note
Do not turn off the machine until the scanned jobs disappear from the job
list.
3-18
Scanning documents
bizhub C450 (Phase3)