Synology DiskStation User Manual page 82

 Disable file downloading
5 Click OK.
Note:
 When you encounter privilege conflicts, the privilege priority is as follows:
 When you create a new shared folder, if the access privilege of admin (or a user belonging to the administrators
group) to the folder is set as
be able to see the folder by going to
To allow Linux clients to access a shared folder:
1 Select the shared folder you want to edit from the shared folder list, and click
2 Click
3 Enter a
 Single Host: The FQDN (fully qualified domain name) or an IP address.
 Wildcards: *,* .synology.com
 IP networks: 203.74.205.32/255.255.252.0, /24
4 Assign Privilege, assign
5 Click OK.
Asynchronous:
Allow Domain Users or Groups to Access Shared Folders
Go to Main Menu
domain user or group, and enable the home service for all domain users.
To manage domain users' access privileges:
admin or users belonging to the administrators group can set up the shared folder permission and the quota of
disk capacity of each domain user. The rule of settings are:
 Privileges priority: NA > RW > RO.
 Privilege preview: User's privilege would be shown here, and that is decided based on the privileges setting
of the user and the groups joined by the user.
 Group privileges: Assign privileges to groups access to access shared folders.
82 Chapter 7: Set Up File Sharing
Downloaded from www.Manualslib.com
No access, then admin (or the user belonging to the administrators group) will only
Main Menu
Create to open the settings window.
Hostname or IP. You may specify a host in three ways:
Root Squash, or tick
NFS servers will reply to requests before the changes on the file are completed.
> Control Panel > Domain Privileges
manuals search engine
No access
> Control Panel > Shared Folder.
Enable asynchronous, and click OK.
Term Explanation
to set up and modify the access permission of a
Synology DiskStation User's Guide
Based on DSM 3.1
> Read/Write > Read only.
NFS Privileges.