Synology DiskStation User Manual page 57

Run S.M.A.R.T. Analysis
Disk S.M.A.R.T. will help you to examine and report the hard disk status to alert possible disk failures. It is
recommended that you change your disk if errors are detected.
To start S.M.A.R.T. test:
1 Select a disk on the disk list and click
2 Choose any of the following test methods and click Start:

Quick Test

Extended Test
Note:
3 The latest test results are shown in the
4 Click
To check S.M.A.R.T. info:
1 Select a disk on the disk list and click
of your disk.
2 Click
Check Disk Info
Here you can see the disk's model name, serial number, firmware version, and total size.
To check disk info:
1 Select a disk on the disk list and click
2 Click
57 Chapter 4: Manage Storage Space
Downloaded from www.Manualslib.com
The exact processing time might vary under different system environment.
Close to finish.
Close to finish.
Close to finish.
manuals search engine
S.M.A.R.T. Test.
Test Result section.
S.M.A.R.T. Info. The numbers listed can help you to diagnose the status
Disk Info.
Synology DiskStation User's Guide
Based on DSM 3.1