Synology DiskStation User Manual page 179

Edit Camera and Recording Settings
To edit camera settings:
1 Choose the camera you want to change settings, and click
camera to change its settings.
2 Edit the settings in
preference.
3 Click
Note:
and generate a new video according to the new settings.
To set the recording schedule:
1 Choose the camera you want to set the recording schedule, and click
2 Click
3 Click the
or Motion Detection and Alarm Recording
each day, click the day grid or the hour grid.
4 If you want to cancel selection, click the eraser icon (Delete) and click the grid you want to cancel selection.
5 Click
To edit motion detection settings:
1 Select the camera you want to change settings, and click Edit.
2 Select
3 You can live view the camera from the screen on the
shows motion detection status. Green means normal and Red means an event is triggered.
4 Choose either
5 If you select
size, and
6 If you select
Threshold. The value percentage range is 1 to 99(%)
7 Click
179 Chapter 14: Safeguard Your Environment with Surveillance Station
Downloaded from www.Manualslib.com
Device Info, Video, Recording,
OK to save the changes.
If you edit the camera settings while recording, Surveillance Station will stop recording the current video,
Recording Schedule in the camera settings.
Continuous Recording button,
OK to save the changes.
Motion Detection from the drop down menu.
Motion detection by the camera
Motion detection by the
Trigger percentage (subject to camera's capability). The value percentage range is 1 to 99(%)
Motion detection by Surveillance
Detection Area to define the detection area.
manuals search engine
Edit > Settings. Or you can double-click the
Storage Settings, and
Motion Detection Recording
buttons, then click the grid. To select the entire day or hour in
Motion Detection
or Motion detection by Surveillance Station (MJPEG
camera, enter the value of Detection
Station, enter the value of
1
.
Synology DiskStation User's Guide
Based on DSM 3.1
Recording Schedule to
Edit > Settings.
button, Alarm Recording (A)
window. The bar next to the screen
sensitivity, Threshold,
Detection sensitivity value and
button,
only).
Object
1
.