Synology DiskStation User Manual page 178

c Change the port number if the camera is using another port.
d Select the camera brand from the drop-down menu.
e Select the camera model from the drop-down menu.
f Select the video channel from the drop-down menu if the camera device is a video server.
g Select the video format from the drop-down menu.
h Select the streaming type from the drop-down menu.
i Enter the username and password of the camera's administrator account.
j Click
4 If you selected
a Select the
b Select the live view source from either Surveillance Station or directly from camera. Choosing live view
source from the camera will mitigate the server loading and minimize the possible time delay. However, you
will have to configure the camera's port forwarding to live view via Internet.
5 Click
a Choose either
only). Choosing
time delay. Choosing
detection capability to camera models without this function built-in.
b Tick the checkbox of
recording while in continuous recording mode
different colors on the event timeline.
c Select the time length of each saved video file under continuous recording mode.
d Select
e Select
6 Click
a Enter a name for the event archive folder that will be used to save the recorded videos.
b Enter the file name prefix that will appear in front of each file name.
c Tick
will be saved and deleted according to the settings.
d Click
7 Click
a To set a schedule plan for automatic recording, click the
Recording,
select an area on the grid.
b To select the entire day or hour in each day, click the day grid or the hour grid.
8 Click
Note:
1 If your camera model is not listed, you can select a similar model or choose
image source path. The source path must be set correctly for the camera to obtain images. Please consult the
camera's manufacturer for the camera source path.
2 In MPEG4 format, Surveillance Station supports audio streaming in both Live View and video recording. The audio
support is only available when the IP camera is equipped with audio function.
3 Surveillance Station supports two streaming types, HTTP and RTSP. The actual supported streaming type
depends on the camera capability.
4 The frame rate should be set appropriately for the best recording performance.
5 Only UPnP compatible cameras will be found when
178 Chapter 14: Safeguard Your Environment with Surveillance Station
Downloaded from www.Manualslib.com
Test Camera to see if the camera can be correctly connected.
Quick Setup, click Finish
Image quality, Resolution, and
Next and edit the Recording settings:
Motion detection by the camera
Motion detection from the camera
Motion detection by Surveillance Station (MJPEG only)
Enable motion detection while in continuous recording mode
Pre-recording time and the
Enable audio when recording
Next and edit the following Storage
Keep the files within (days)
Estimate Required Space to evaluate the space usage.
Next and edit the following Schedule
Alarm Recording(A),
Finish to complete the setup.
manuals search engine
1
2
3
to complete setup. Otherwise, click
4
Frame rate for recording image and live view image.
or Motion detection by Surveillance Station (MJPEG
will mitigate server loading and minimize the possible
at your preference. Different events will be displayed in
Post-recording time under event recording mode.
and choose Audio format
Settings:
or Limit the archive folder up to (GB)
settings:
Continuous
Motion Detection and Alarm Recording
Search Camera is clicked.
Synology DiskStation User's Guide
Based on DSM 3.1
Next to edit the Video
will provide Motion
or Enable alarm
if your camera supports the function.
and specify the value. Archives
Recording, Motion Detection
buttons, and then click or
User Define and enter the camera's
settings: