Synology DiskStation User Manual page 199

To add a VisualStation:
1 Click on the
2 The search result will show all the VisualStations within the network. Select the VisualStation that you would
like to pair. Make sure the status of the VisualStation is Unlocked.
3 Click on
 Create a name for the VisualStation.
 Define LAN configuration.
4 Click on
 Select VisualStation's channel layout. The selected setting will be reflected on the preview area below.
 All the cameras added on the Surveillance Station are also listed on this page. Select the camera you would
like to show on VisualStation, and drag to the preview area.
5 Click on
6 Press and hold the
when its status is changed to Locked.
To edit the settings of a VisualStation:
1 Select the VisualStation you would like to edit. Double click on it or click on
2 Edit the corresponding settings.
3 Click on
To enable/disable a VisualStation:
1 Select the VisualStation you would like to enable/disable.
2 Click on the
3 Select
Note:
To delete a VisualStation:
1 Select the VisualStation you would like to delete.
2 Click on the
3 Click on
To restore VisualStation to factory default:
1 Press and hold the
2 The status of the VisualStation will appear as
To pair the VisualStation with the DiskStation again, you need to delete the entry from the list and add it again.
Follow the delete steps and continue with the add process.
199 Chapter 14: Safeguard Your Environment with Surveillance Station
Downloaded from www.Manualslib.com
Add button.
Next to continue to Network Settings.
Next to continue to Camera Settings.
Finish to save the settings.
Lock button on the VisualStation unit for 3 seconds. The LED light will glow solid green
Save to finish.
Enable button on the top of the page.
Enable or Disable.
Disabling VisualStation will not delete its settings.
Delete button on the top of the page.
Yes to finish.
RESET button at the back of the VisualStation until you hear a beep.
manuals search engine
Synology DiskStation User's Guide
Edit
Reset on the VisualStation list.
Based on DSM 3.1
to proceed.