Synology DiskStation User Manual page 37

Set Up Time
Click the
have them set automatically using a network time server.
To set the time zone:
1 Choose a time zone from the
2 Click OK.
To set the date and time manually:
1 Choose
2 Click OK.
To sync the date and time with NTP server:
1 Make sure a valid DNS server IP has been entered at
DiskStation is connected to the Internet.
2 Choose
3 Assign a sync frequency from the drop-down menu.
4 Enter the address of your network time server, or choose a server from the drop-down menu.
5 Click
6 Click OK.
37 Chapter 3: Modify System Settings
Downloaded from www.Manualslib.com
Time tab to set up the time. You can check the current time, manually set the server's date and time, or
Time zone
Manually and select the date and time.
Synchronize with a NTP server.
Update now to make sure you can successfully synchronize time with the server.
manuals search engine
drop-down menu.
Main Menu > Control Panel
Synology DiskStation User's Guide
Based on DSM 3.1
> Network and that your