Synology DiskStation User Manual page 32

Wireless Network
Click Wireless Network
Note:
DiskStation.
To set up a wireless network:
Click Set up a wireless network
wireless network, click

Join a wireless
signal strength and security status. If the access point you want to access is locked with password protection,
the wizard will ask you to enter the password.

Connect to a hidden wireless
privacy reason, it will not be discovered during the scanning. You can manually connect to those hidden
access points by entering the required information manually.

Create an Ad-Hoc
the wireless network to a wired Ethernet network, Ad-Hoc network is also widely used. In an Ad-Hoc network,
all wireless devices within range of each other can communicate in a peer-to-peer fashion without a central
access point. To set up an Ad-Hoc network, all wireless devices have to be configured for Ad-Hoc mode
instead of the infrastructure mode.
Note:
---------
1
Wireless network is supported on specific models only.
32 Chapter 3: Modify System Settings
Downloaded from www.Manualslib.com
on the left side to connect Synology DiskStation to a wireless network.
Wireless network is available only when a wireless dongle is plugged into the USB port of your Synology
and choose from the following options (If you are already connected to a
Disconnect first).
network: The wizard will scan available wireless access points or Ad-Hoc networks with their
network: If an access point doesn't broadcast its SSID (Network Name) for
Network: In addition to infrastructure network, in which a central access point (AP) bridges
For a list of compatible wireless dongles, visit www.synology.com.
manuals search engine
Synology DiskStation User's Guide
Based on DSM 3.1
1