Removing Grip Holding Socket
(Figure 4-48)
Use a 2.5mm Allen wrench to remove three screws holding grip holder socket to camera body.
Camera Body
Grip Holder
Socket
Washers (3)
Screws (3)
Figure 4-48. Removing grip holder socket
Removing Bottom Plates
(Figure 4-49)
Use Phillips screwdriver to remove three screws from each bottom plate and lift off the plates. Pry
out the two bosses. Remove excess adhesive from plates and clean parts before reassembly.
Right Bottom
Boss
Plate
Screws (6)
Left Bottom
Plate
Figure 4-49. Removing bottom plates
59