Locking Accessory Viewfinder On To Camera - Polaroid 600SE Repair Manual

Unlock the viewfinder by turning the locking screw opposite to the direction of the arrow on the
viewfinder. When fully unlocked, the locking screw can be seen in its topmost position. If this
locking screw is partially down, it will prevent the viewfinder from being fully seated on the
accessory show. Slide the chrome mounting base of the viewfinder into the accessory shoe.
Push forward until the stopper screw on the accessory shoe is inside the square recess on the
mounting base.
Note: The viewfinder may feel snug and secure before it is fully seated. This is because it is held
by the guide springs on the accessory shoe. Do not leave it in this partially locked
condition. The picture framing would be faulty and the viewfinder could be knocked off the
camera.
The locking screw should be on top of the stopper screw as shown in Figure 2-6. Turn the locking
screw as far as it will go in the direction of the lock arrow. The viewfinder is now secured to the
top of the camera.
Figure 2-6. Locking accessory viewfinder on to camera
" Right "
Locking screw is locked on top of stopper
screw. Mounting base is fully inserted into
accessory shoe.
23