Removing Framing Screen From The Parallax Frame (Model 600Se); Removing Framing Mask Assembly (Model 600Se) - Polaroid 600SE Repair Manual

Parallax Frame
Figure 4-21. Removing framing mask assembly (model 600SE)
Removing Framing Screen from Parallax Frame (Model 600SE)
The framing screen may be removed from the parallax frame by removing the upper left side
screw and washer as shown in Figure 4-22. The other screws fit into a hole and two slots in the
film. Gently lift the film over the pivot screw. Slide the film from the two right side screws; loosen
the screws only if film sticks to parallax frames.
Note: Removal of the film framing screen from the parallax frame will require realignment of the
framing images and adjustment of the mask and framing screen positions.
Parallax Frame
Figure 4-22. Removing framing screen from parallax frame (model 600SE)
Rangefinder Assembly
Film Mask Assembly
Framing Screen
Metal Mask
Pivot Screw
Framing Screen
42
Film Mask Guide
Screws
Spring Stud
Framing Mask
Shoulder
Screw
Screw (2)
Screw Slot
Screw
Washer
Metal Mask
Screw
Spring