F-93
REMOVAL AND REPLACEMENT PROCEDURE (continued)
REPLACEMENT PROCEDURE
1. Place the new Fan Assembly into position in the
machine.
2. Connect the lead connection plug (J55 or J56).
See the Wiring Diagram.
3. Replace any cable ties previously removed.
4. Using a screwdriver, attach the four machine
screws, associated lockwashers and flatwash-
ers to the Fan Assembly.
5. Make sure the fan spins freely without any
obstruction.
6. Using a 5/16" nutdriver, attach the six screws
securing the brickwork panel located at the rear
of the machine.
TROUBLESHOOTING AND REPAIR
POWER WAVE
FAN
®
S500
F-93