Playback (Advanced Operation); Hdmi Control Function - Marantz NR1604 Owner's Manual

Playback (Advanced operation)

Setup (vpage 22)
Playback (Basic operation) (vpage 29)
Selecting a listening mode (Sound Mode)
(vpage 72)
Connections (Advanced connection) (vpage 93)
n HDMI control function (vpage 95)
n Sleep timer function (vpage 96)
n Web control function (vpage 97)
n Dual backup memory function (vpage 99)
n Panel lock function (vpage 99)
n Remote lock function (vpage 100)
n Various memory functions (vpage 100)
DVD

HDMI control function

A recent addition to the HDMI standard is CEC, which allows control
signals from one device to communicate with another device via the
HDMI cable connection. Not all HDMI-equipped devices allow .
n Operations possible by HDMI control
• This unit's power off function can be linked to the TV power
off operation.
• You can switch audio output devices with a TV operation.
When you set "Output audio from amp" in the TV audio output
setup operation, you can switch the AV receiver unit's power on.
• You can adjust this unit's volume in the TV volume adjustment
operation.
• You can switch this unit's input sources through linkage to TV
input switching.
• When playing a disc player, this unit's input source switches
to the appropriate source for that player.
• If you switch the input source of the unit to "TV AUDIO", you
can play TV audio with this unit (vpage 8
(Audio Return Channel) function").
• When "HDMI Control" (vpage 116) in the menu is set to
"On", signals input to the HDMI input connector are output to
the television or other device connected to the HDMI output
connector, even if the power of this unit is in standby (pass-
through function).
To use this unit to play the audio of a TV that does not support the ARC
function, connect the TV to this unit with an optical-digital or analog
connection (vpage 8).
95
n Setting procedure
1
Set the HDMI output connector corresponding with
the HDMI control function.
Set "HDMI Control" (vpage 116) to "On".
2
Turn the power on for all the devices connected by
HDMI cable.
3
Set the HDMI control function for all devices
connected by HDMI cable.
• Please consult the operating instructions for the connected devices
to check the settings.
• Carry out steps 2 and 3 should any of the devices be unplugged.
4
Switch the television input to the HDMI input
"About ARC
connected to this unit.
5
Switch this unit input to the HDMI input source and
check if the picture from the player is ok.
6
When you turn the TV's power to standby, check
that the power of this unit also goes to standby.
v See overleaf