Marantz NR1604 Owner's Manual page 139

Setting items
Add New Feature Upgrade Package : Display the items to be upgraded.
Upgrade Status : Display a list of the additional functions provided by the
Display new features that
can be downloaded to upgrade.
this unit and perform an Upgrade Start : Execute the upgrade process.
upgrade. When the upgrade starts, the power indicator becomes red and the menu
screen is shut down. During the upgrade, the amount of upgrade time
NOTE
which has elapsed is displayed.
In cases where it is not • If the upgrade is not successful, an error message identical to those in
possible to connect to the
"Update" will appear on the display. Check the settings and network
network after adding a
environment and then perform the upgrade again.
new function, connect to
See the Marantz website for details about upgrades.
the network again using
When the procedure is complete, "Registered" is displayed in this
"Network" (vpage 127).
menu and upgrades can be carried out. If the procedure has not been
carried out, "Not Registered" is displayed.
The ID number shown on this screen is needed when carrying out the
procedure.
The ID number can also be displayed by pressing and holding the main
STATUS
unit's
Notes concerning use of "Update" and "Add New Feature"
• In order to use these functions, you must have the correct system requirements and settings for a
broadband Internet connection (vpage 20).
• Do not turn off the power until updating or upgrading is completed.
• Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/
upgrading procedure to be completed.
• Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/
upgrading is completed. Furthermore, there may be cases where backup data is reset for the
parameters, etc., set on this unit.
• If the update or upgrade fails, press and hold the
remove and re-insert the power cord. "Update retry" appears on the display and update restarts from
the point at which update failed. If the error continues despite this, check the network environment.
DVD
Setting details
SOUND MODE
and for at least 3 seconds.
X
on the main unit for more than 5 seconds, or
• Information regarding the "Update" function and "Add New Feature" will be announced on the Marantz
web site each time related plans are defined.
• When usable new firmware is released with "Update" or "Add New Feature", a notification message
is displayed on the menu screen. When you do not want to be notified, set "Notifications" – "Update"
(vpage 135) and "Notifications" – "Upgrade" (vpage 135) to "Off".
Setup Lock
Protect settings from inadvertent changes.
Setting items
Lock On : Turn protection on.
Off : Turn protection off.
When cancelling the setting, set "Lock" to "Off".
NOTE
When "Lock" is set to "On", the settings listed below can no longer be
changed. Also, "Setup Locked!" is displayed if you attempt to operate
related settings.
• Setup menu operations
136
General
Default settings are underlined.
Setting details