Usage Data - Marantz NR1604 Owner's Manual

Usage Data

To help us improve our products and customer service, Marantz collects anonymous information about
how you use your AV receiver (such as frequently used input sources and sound modes and speaker
settings). Marantz will never provide any information we collect to third parties.
Yes : Provide Marantz with information about how you use this unit via the network.
No : Do not provide Marantz with information about how you use this unit via the network.
Firmware
Set whether or not to check for firmware update, update the firmware, and display update and upgrade
notifications.
Setting items
Update Check for Update : Check for firmware updates. You can also check
Update the firmware of the approximately how long it will take to complete an update.
Update Start : Execute the update process.
receiver.
When updating starts, the power indicator becomes red and the menu
NOTE
screen is shut down. The amount of update time which has elapsed is
In cases where it is not
displayed.
possible to connect to
• If updating fails, the set automatically retries, but if updating is still not
the network after doing a
possible, one of the messages shown below is displayed. If the display
firmware update, connect
reads as shown below, check the settings and network environment,
to the network again using
then update again.
"Network" (vpage 127).
Display
Updating fail
Login failed
Server is busy
Connection fail
Download fail
DVD
Setting details
Setting details
Description
Updating failed.
Failure to log into server.
Server is busy. Wait a while then try again.
Failure in connecting to server.
Downloading of the firmware has failed.
Setting items
Notifications Update : The notification message is displayed for about 20 seconds when
Displays a notification the power is turned on. Connect to broadband Internet
message on this unit's when using this function.
menu screen when the • On : Display update message.
latest firmware is released • Off : Do not display update message.
with "Update".
Display a notification
• When you press
message on this unit's
notification message, the "Check for Update"
menu screen when
screen is displayed (Refer to
downloadable firmware is
information on "Update").
released with "Add New
o
• Press
Feature".
message.
Upgrade : The notification message is displayed for about 20 seconds when
the power is turned on. Connect to broadband Internet
when using this function.
• On : Display upgrade message.
• Off : Do not display upgrade message.
• When you press
"Add New Feature" screen is displayed (Refer to
information on "Add New Feature").
STATUS
• Press
135
Setting details
ENTER
during display of the
page 135 for more
BACK
or to erase the notification
ENTER
during display of the notification message, the
page 136
SOUND MODE
or to erase the notification message.
v See overleaf
General
(vpage 20)
(vpage 20)
for more