Bt Hands Free Calling; Setup Before Using; About Bluetooth; Before Using Bluetooth Function - Alpine CDA-137EBT Owner's Manual

BT Hands Free Calling

SOURCE/
Rotary encoder
  /ENTER

/ II
ABC SKIP/BAND VIEW

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication between
a mobile device or personal computer over short distances. This enables a
hands-free call or data transmission between BLUETOOTH compatible
devices. BLUETOOTH transmission is available in the unlicensed 2.4
GHz spectrum if the distance between devices is within 10 meters. For
details, refer to the BLUETOOTH Home page (http://www.bluetooth.
com).
Note
Depending on the BLUETOOTH version, a BLUETOOTH compatible
•
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices is
not guaranteed. For handling of the BT compatible device, consult your
ALPINE dealer or ALPINE website.
Depending on the surroundings, BLUETOOTH wireless connection may
•
be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the connected
device(s).
When you search for this unit using the BLUETOOTH compatible phone,
•
the unit name is displayed as "Alpine CD Receiver".

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to
be made.
Set "HFP" or "Audio" to ON when you want to use Hands-
Free phone or Bluetooth Audio function. Refer to "Setting
the BLUETOOTH Connection (BT IN)" on page 22.
Note
Before using BLUETOOTH function, it must be paired with this unit.
•
Refer to "How to connect to a BLUETOOTH compatible device (Pairing)"
on page 21.
SETUP
1 2
 
Preset buttons
(1 through 6)
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.

Pairing a BLUETOOTH compatible device with

SSP (Secure Simple Pairing)

1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Turn the Rotary encoder to change the head unit display
from "Pairing NO" to "Pairing YES", and then presss/ENTER.
If "Pairing NO" is selected, the connection will be cancelled.
3
If the pairing was successful, "Connected" is displayed for a
few seconds. The head unit then returns to its previous state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
2
Input the Passcode ("0000") in a BLUETOOTH compatible
device.
Note
• The Passcode is fixed as "0000".
3
If the pairing was successful, "Connected" is displayed for a
few seconds. The head unit then returns to its previous state.
Note
If the connection is unsuccessful, "Failed" is displayed.
•
• After a successful pairing, the two devices should re-pair automatically
whenever the vehicle's ignition is turned ON. However, the re-pairing
may fail. If the auto re-pairing fails, try to pair manually.
Set "Visible Mode" to ON to enable this unit to be recognised by a
•
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 22.
• You can also manually pair the BLUETOOTH devices from this unit. For
details, refer to "Pairing a BLUETOOTH Device from the unit" on page
22.

BLUETOOTH SETUP

The following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function
Note
• Set "HFP" or "Audio" to ON, and then perform BLUETOOTH SETUP
operation. Refer to "Setting the BLUETOOTH Connection (Bluetooth
IN)" on page 22.
1
Press and hold SETUP for at least 2 seconds to activate the
SETUP mode.
2
Turn the Rotary encoder to select "Bluetooth", and then
press s/ENTER.
The BLUETOOTH setup mode is activated.
21
-EN