Indication For Usb Memory; Indication For Ipod Mode; Bluetooth Mode - Alpine CDA-137EBT Owner's Manual

• No indicated disc.
- Choose another disc.

Indication for USB Memory

• Database error or decoder error
- You can solve the problem by switching the source.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the USB Memory or
changing source.
• Abnormal current is run to the USB connector device.
- You can solve the problem by switching the source.
A USB device that is not supported by the unit is connected.
•
- Connect a USB device that is supported by the unit.
• A USB Memory is not connected.
- Make sure the USB Memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB Memory
- Connect the USB Memory device after storing songs (files).
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.

Indication for iPod Mode

• The iPod/iPhone is not connected.
- Make sure the iPod/iPhone is correctly connected (refer to
"Connections" on page 50). Make sure the cable is not bent
excessively.
There are no songs in the iPod/iPhone.
•
- Download songs to the iPod/iPhone and connect to this unit.
• Database error or decoder error.
- You can solve the problem by switching the source.
• Communication error or boot error, etc
- You can solve the problem by reconnecting the iPod/iPhone or
changing source.
• The iPod/iPhone is not verified.
- You can solve the problem by reconnecting the iPod/iPhone.
• Abnormal current is run to the USB connector device.
- You can solve the problem by switching the source.
A USB device that is not supported by the unit is connected.
•
- Connect a USB device that is supported by the unit.

BLUETOOTH mode

No Unit
• The BLUETOOTH device is not connected.
- Connect the BLUETOOTH device.
45
-EN