Bt Hands Free Calling (Cde-178Bt/Ide-178Bt Only); Setup Before Using; About Bluetooth; Before Using Bluetooth Function - Alpine CDE-178BT Owner's Manual

BT Hands Free Calling
(CDE-178BT/iDE-178BT
only)
/ VOICE CTRL.
Rotary encoder
/ENTER



/ II
SOURCE
AUDIO/SETUP
BAND/
ABC SEARCH

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 metres. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
Notes
• Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible devices
is not guaranteed. For handling of the BT compatible device, consult
your Alpine dealer or Alpine website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner's Manual of the connected
device(s).
• When you search for this unit using the BLUETOOTH compatible
phone, the unit name is displayed as "Alpine CD Receiver"(CDE-178BT
only)/"Alpine Digital Media Receiver"(iDE-178BT only).
VIEW

1
 2
Preset buttons
(1 through 6)

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to
be made.
Set "Bluetooth IN" to ON when you want to use
Hands-Free phone or Bluetooth Audio function. Refer to
"Setting the BLUETOOTH Connection (Bluetooth IN)" on
page 32.
Note
• Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device
(Pairing)" on page 31.
How to connect to a BLUETOOTH
compatible device (Pairing)
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver"(CDE-178BT only)/"Alpine Digital
Media Receiver"(iDE-178BT only) for pairing.
2
Turn the Rotary encoder to change the head unit display
from "Pairing NO" to "Pairing YES", and then press
ENTER.
If "Pairing NO" is selected, the connection will be cancelled.
3
If the pairing was successful, "Connected" is displayed for
a few seconds. The head unit then returns to its previous
state.
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver"(CDE-178BT only)/"Alpine Digital
Media Receiver"(iDE-178BT only) for pairing.
2
Input the passcode ("0000") in a BLUETOOTH compatible
device.
Note
• The passcode is fixed as "0000".
3
If the pairing was successful, "Connected" is displayed for
a few seconds. The head unit then returns to its previous
state.
Notes
• If the connection is unsuccessful, "Failed" is displayed.
• After a successful pairing, the two devices should connect automatically
whenever the vehicle's ignition is turned ON. If the auto connection
fails, try to reconnect manually.
• Set "Visible Mode" to ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 32.
• You can also manually pair the BLUETOOTH devices from this unit.
For details, refer to "Pairing a BLUETOOTH Device from the unit" on
page 32.
31
-EN