Terminology; Sound Setting; Adjusting Subwoofer Level/Balance (Between Left And Right)/Fader (Between Front And Rear)/Auto Volume/Black Out/Defeat - Alpine CDA-137EBT Owner's Manual

Terminology

Bit rate
This is the "sound" compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format.
Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA files.
Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically for
all burned discs.
12
-EN

Sound Setting

SOURCE/
Rotary encoder
 /ENTER


AUDIO/SOUND SETUP
BAND
Adjusting Subwoofer Level/Balance
(Between Left and Right)/Fader (Between
Front and Rear)/Auto Volume/Black Out/
Defeat
1
Press AUDIO repeatedly to choose the desired mode.
Each press changes the mode as follows:
*1
SUBWOOFER d BALANCE d FADER d BLACK OUT
VOLUME d SUBWOOFER
When the Subwoofer mode is set to OFF, its level cannot be
*1
adjusted, refer to "Turning Subwoofer ON/OFF" on page 13.
When BLACK OUT mode is turned ON, after 5 seconds, all display
*2
indications on this unit will turn off to reduce power consumption.
This additional power enhances the sound quality. .
Subwoofer Level
Balance
Fader
Black Out
Defeat
ON/OFF
Note
• If no operation is performed for 5 seconds after selecting the
SUBWOOFER BALANCE, FADER, BLACK OUT or DEFEAT mode,
the unit automatically returns to normal mode.
• If any button on the unit is pressed during the BLACK OUT Mode,
the function is displayed for 5 seconds before returning to Blackout
mode.
2
Turn the Rotary encoder until the desired sound is obtained
in each mode.
Note
• Depending on the connected devices, some functions and display
indications do not work.
MX
Preset buttons
(1 through 6)
*2
d DEFEAT d
0 ~ 15
–15(L) ~ 15(R)
–15(R) ~ 15(F)
ON/OFF
ON/OFF
0 ~ 35