Ubee DDW3611 User Manual page 56

Using the Port Triggering Option
4. Only John can connect to the Real Audio server until the connection is closed or times
out.
Steps
To set up port triggering:
1. Click Gateway from the main menu.
2. Click Port Triggering from the left side menu. Fields are described following the
screen example.
Trigger Range
Target Range
End Port
Protocol
Enable
Apply
52
Label
Start Port
End Port
Start Port
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
Description
Defines the trigger port or a range of ports that trigger the
router to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines a target range port or a range of ports a server on the
WAN uses when it responds to service requests. The router
forwards the traffic with this port (or range of ports) to the
client computer on the LAN that requested the service.
Defines a port number or the starting port number in a range
of port numbers.
Defines a port number or the ending port number in a range of
port numbers.
Defines the protocol type for this rule, UDP, TCP, or Both.
Activates this rule when checked.
Saves all screen changes when clicked.
Ubee Interactive