Connecting Devices To The Network; Connecting An Ethernet Device - Ubee DDW3611 User Manual

Connecting Devices to the Network

modem and then to the power outlet.
5. Connect the network cable included in the product package to your computer's
Ethernet port. Connect the other end to the LAN1, LAN2, LAN3, or LAN4 port to the
cable modem.
6. Connect a coaxial cable from the CABLE port on the device to the cable wall outlet, or
to a cable splitter connected to the wall outlet.
7. Connect the two antennas provided in the product packaging.
8. Validate the network connection using the device LEDs to confirm operations:
 The Wlan LED must be solidly lit.
 The Power, DS, US, and Ready LEDs are solidly lit.
Refer to
2.2 Connecting Devices to the Network
Use the instructions below to connect network devices and validate device functionality.
Topics
See the following topics:
Connecting an Ethernet Device on page 12

 Connecting a Wireless Device on page 13
 Connecting a USB Device on page 14
 Troubleshooting the Installation on page 14
2.2.1

Connecting an Ethernet Device

You can connect up to three additional Ethernet devices to the DDW3611.
Steps
To connect another Ethernet device to the network:
1. Connect the Ethernet cable from the Ethernet device (for example, a PC or gaming
console) to an open Ethernet port on the back of the DDW3611.
2. Use the device LEDs to confirm operations. Refer to
page 8
3. Open a Web browser and go to any Web site to validate network/Internet connectivity
(for example, http://www.wikipedia.org).
4. If the connected device is a gaming console, perform any online task supported by the
console (for example, log into the gaming server, play an online game, download
content).
12
Understanding LED Operations on page 8
for more information.
Ubee DDW3611 Wireless Cable Modem Gateway Subscriber User Guide • November 2012
for more information.
Understanding LED Operations on
Ubee Interactive