Composite E-E Cb Signal Level Check (Vd-032 Board) - Sony DSR-45 Service Manual

37. Composite E-E CB Signal Level Check
(VD-032 Board)
Mode E-E
Signal Color bar (NTSC: with 7.5% setup)
(VIDEO input) (Note)
Measurement Point COMPONENT OUT B-Y terminal
(75 Ω terminated)
Measuring Instrument Oscilloscope
A = 700 ± 10 mVp-p (NTSC)
Specified Value
A = 525 ± 10 mVp-p (PAL)
Note: Set "VIDEO" mode with INPUT SELECT switch
Adjusting method:
1) Check the component CB signal level (A) to the specified value.
A
Fig. 5-3-42
H
5-81
DSR-45/45P