E-E Blanking Level Adjustment (Vd-032 Board) - Sony DSR-45 Service Manual

DSR-45/45P

21. E-E Blanking Level Adjustment (VD-032 Board)

Mode
Signal
Measurement Point
Measuring Instrument
Adjustment Page
Adjustment Address
Specified Value
Note: Set "COMPONENT" mode with INPUT SELECT switch
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: E, address: CC, change the data and adjust the
blanking level (A) to the specified value.
3) Press the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
For NTSC model
magnified
E-E
Color bar (NTSC: with 7.5% setup)
(COMPONENT input) (Note)
COMPONENT OUT Y terminal
(75 Ω terminated)
Oscilloscope
E
CC
A = 0 ± 3 mV
A
For PAL model
magnified
Fig. 5-3-27
5-68
A