Insert With Positive Connection - Lopi 1750i Inbuilt Owner's Manual

12
Insert with
Positive
Connection
NOTE:
Most factory-built
chimney manufacturers
make stainless steel
chimney liners, either
flexible or rigid. This
provides a wide variety
of installation options.
Make sure to follow the
manufacturer's
instructions for
installation and
support.
© Travis Industries
Installation
Install a non-combustible
cover plate to prevent water
from entering the chimney
Combustible Mantle
Surround Panels
See the section "Insert
Placement Requirements" for
minimum clearances and
hearth required.
(for qualified installers only)
100-01280
Cap (prevents water
from entering)
Flue Liner
The liner must be
stainless steel
connector or flexible
vent. Follow the liner
manufacturer's
insturctions for
installation and
support.
Airtight Insulated
Clean-Out
Remove damper
or wire it open
Figure 6
4141215