Door Parts; Lopi Republic Door; Replacing The Glass; Replacing The Door Gasket - Lopi 1750i Inbuilt Owner's Manual

22

Door Parts

Lopi Republic Door

14
4
5
ID # Description
1 Glass Gasket
3 Glass Clip w Gasket– 3 Hole
5 RTV High Temp. 600° Silicone
7 Avalon Door Handle (wood)
9 Lopi Glass
11 Lopi Door Handle Assembly
13 Door Cam

Replacing the Glass

The glass must not contact the door retainer or glass clips directly. The glass gasket and glass clip
gaskets insulate the glass to prevent cracking. Do not over-tighten the glass clips.
NOTE: The glass gasket is placed in the grove along the inside perimeter of the door retainer. Make sure
the glass clip screws are all fully tightened - they must be flush with the door retainer for the door shell to
install.

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower left corner) and
cut off any excess gasket (do not stretch the gasket). The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.

Replacing the Door Handle

See the illustration above for a component list (see pg. 22 for details on adjusting the door).
© Travis Industries
Maintaining Your Appliance
1
10
9
3
Qty. Part #
1 250-00173
2/1 250-00174
1 250-00594
1 250-00172
1 250-00171
1 250-00598
ID # Description
2 Avalon Glass
4 Door Gasket
6 Avalon Door Handle Assembly
8 Door Washer
10 Glass Clip w Gasket– 2 Hole
12 Lopi Door Handle (spring)
14 Screws (8) 8-32 x 1/2" Torx
100-01280
12
11
8
13
Qty. Part #
1 250-00177
1 250-00170
1 250-00818
1 250-00364
1 250-00175
1 250-00373
1 225-20039
4141215