Removing And Installing The Needle Protection Mounting - DURKOPP ADLER 610 Service Instructions Manual

Work fundamentals
Fig. 13: Removing and installing the support plate.
①
(1) - Screws
(2) - Support plate
Removing the support plate
1. Remove both screws (1).
2. Carefully remove the support plate (2) with mechanics and cylinder (3).
Installing the support plate
1. Carefully fit the support plate (2) with mechanics and cylinder (3).
2. Secure the support plate with both screws (1).

3.6.2 Removing and installing the needle protection mounting

Fig. 14: Removing and installing the needle protection mounting.
(1) - Needle protection
Removing the needle protection
1. Loosen both screws (2).
2. Carefully remove the needle protection (1) with mounting.
Service Instructions 610/630 - 00.0 - 10/2014
②
①
③
(3) - Cylinder
②
(2) - Screws
21