Removing The Paper Roll - Sharp ER-A410 Instruction Manual

ER-A410/A420(SEC)-5 03.12.22 0:23 PM

Removing the paper roll

When a colored dye appears on the paper roll, it is time to replace the existing paper roll. Replace the paper roll
with a new one. If you plan not to use your register for an extended period of time, remove the paper roll, and
store it in the appropriate place.
Removing the receipt paper roll
Removing the journal paper roll
180
Page 180
1.
Remove the printer cover.
2.
Cut the paper behind the printer and near the paper roll.
3.
Press the
comes out completely.
4.
Remove the paper roll from the back of the printer.
Note
1.
Remove the printer cover.
2.
Press the
Area to cut
printed part is out of the way.
3.
Cut the paper and remove the take-up spool.
4.
Cut the paper behind the printer and near the paper roll.
5.
Press the
comes out completely.
6.
Remove the paper roll from the back of the printer.
Note
‰
key until the paper remaining in the printer
Do not pull the paper through the printer.
Ô
key to advance the journal paper until its
Ô
key until the paper remaining in the printer
Do not pull the paper through the printer.