Download Print this page

Advertisement

Quick Links

ELECTRONIC CASH REGISTER
Basic User Manual
Thank you very much for your purchase of the SHARP Electronic Cash Register, Model ER-A411/
ER-A421.
Please read this manual carefully before operating your machine in order to gain full understanding
of functions and features.
Please keep this manual for future reference. It will help you if you encounter any operational
problems.
For a free download of the FULL DETAILED INSTRUCTION MANUAL, please go to the following
related URL. For the countries other than described below, consult your authorized SHARP dealer.
- The United Kingdom and Republic of Ireland: www.sharp-pos.co.uk
- Netherlands and Belgium and Luxemburg: www.sharp.nl
- Sweden: www.sharp.se
CAUTION:
The cash register should be securely fitted to the supporting platforms to avoid instability when the drawer is open.
CAUTION:
The socket-outlet shall be installed near the equipment and shall be easily accessible.
VORSICHT:
Die Netzsteckdose muß nahe dem Gerät angebracht und leicht zugänglich sein.
ATTENTION:
La prise de courant murale devra être installée à proximité de l'équipement et devra être facilement accessible.
AVISO:
El tomacorriente debe estar instalado cerca del equipo y debe quedar bien accesible.
VARNING:
Det matande vägguttaget skall placeras nära apparaten och vara lätt åtkomligt.
LET OP:
Het stopcontact dient in de buurt van de kassa en gemakkelijk toegangbaar te zijn.
CAUTION:
For a complete electrical disconnection pull out the mains plug.
VORSICHT:
Zur vollständigen elektrischen Trennung vom Netz den Netzstecker ziehen.
ATTENTION:
Pour obtenir une mise hors-circuit totale, débrancher la prise de courant secteur.
AVISO:
Para una desconexión eléctrica completa, desenchufar el enchufe de tomacorriente.
VARNING:
För att helt koppla från strömmen, dra ut stickproppen.
LET OP:
Trek de stekker uit het stopcontact indien u de stroom geheel wilt uitschakelen.
WARNING:
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
FOR CUSTOMERS IN U.K.
The wires in this mains lead are coloured in accordance with the following code:
BLUE:
BROWN:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red.
The apparatus must be protected by a 3A fuse in the mains plug or distribution board.
CAUTION: DO NOT CONNECT THE LIVE (BROWN) WIRE OR THE NEUTRAL (BLUE) WIRE TO THE EARTH
TERMINAL OF YOUR 3-PIN MAINS PLUG.
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
Noise level LpA: 57.6 dB(A-weighted)
Measured according to EN ISO 7779:2001
[Maximum value if the cash drawer springs open LpAI: 77.0 dB(A-weighted)]
MODEL
ER-A411
ER-A421
14F TINSE2637BSZZ
IMPORTANT
Neutral
Live
EN
IMPORTANT
• Install the register in a location not subject to direct sunlight, unusual temperature changes, high humidity or
splashing water.
Installation in such locations could cause damage to the cabinet and the electronic components.
• Never install the register in saline areas (e.g.: close to the sea).
Installing the register in such locations could cause component failure with the corrosion.
• Never operate the register with wet hands.
The water could seep into the interior of the register and cause component failure.
• When cleaning the register, use a dry, soft cloth. Never use solvents, such as benzine and/or thinner.
The use of such chemicals will lead to discoloration or deterioration of the cabinet.
• The register plugs into any standard wall outlet (offi cial (nominal) voltage).
Other electrical devices on the same electrical circuit could cause the register to malfunction.
• If the register malfunctions, call your authorized SHARP dealer for service - do not try to repair the register
yourself.
• For complete electrical disconnection, disconnect the main plug.
• To prevent the register from moving when the drawer opens, the fi xing angle bracket is supplied with the
register. If you want to install the bracket, consult your authorized SHARP dealer.
• In order to operate the register properly, you must initialize it before operating for the fi rst time. To initialize the
register, consult your authorized SHARP dealer.
PRECAUTION
This register has a built-in memory protection circuit which is operated by a rechargeable battery pack. It
should be known that all batteries will, in time, dissipate their charge even if not used. Therefore to insure an
adequate initial charge in the protection circuit and to prevent any possible loss of memory upon installation,
it is recommended that each unit be allowed to be recharged for a period of 24 to 48 hours prior to use by the
Printed in Thailand
customer.
In order to charge the battery pack, the machine must be plugged in. This recharging precaution can prevent
unnecessary initial service calls.
The battery pack is a consumable part, and its operating time will get shorter gradually each time it is recharged
for memory backup.
When the battery pack cannot be charged enough to perform memory backup, it means that the service life of
the battery pack has expired.
If this is the case, consult your authorized SHARP dealer.
In order to allow a plug & play connection of the optional scanner the Pin 9 of the D-Sub
connector 1 (Channel 1) uses +5V.
Be very careful of this +5V in case connection of a different device should be done so that a
damage of the register or device is avoided.
1

Part Names and Functions

■ Front view
ER-A411
Printer cover
Keyboard
(ER-A411: Normal type, ER-A421: Flat type)
Drawer
Drawer lock

■ Operator display

Mode name

■ Customer display

Caution Scanner connection

External View

ER-A421
Displays
Sales information area:
Sales information you have just entered such as items
and prices will appear between 1st line and 3rd line.
Total is always appear at 4th line.
Numeric entry area
Status area
Status information
Clerk/cashier code
Text/message display area
Numeric display area
■ Rear view
1
3
2
4
SD card slot
Operator display
Customer display
RS232

Advertisement

loading

Summary of Contents for Sharp ER-A411

  • Page 1: Part Names And Functions

    • The register plugs into any standard wall outlet (offi cial (nominal) voltage). Other electrical devices on the same electrical circuit could cause the register to malfunction. • If the register malfunctions, call your authorized SHARP dealer for service - do not try to repair the register yourself.
  • Page 2: Selecting An Operating Mode

    Keyboard Selecting an Operating Mode Standard keyboard layouts for ER-A411 and ER-A421 are as shown below. For details on the key functions and optional keys, refer to “FULL DETAILED INSTRUCTION MANUAL”. Mode Selection Window ■ ER-A411 When you turn the register on and press the key, the mode selection window will appear on the display.
  • Page 3: Basic Sales Entry

    ER-A421. Contact with glue, thinner or a freshly copied blueprint. To use the VOID mode, consult your authorized SHARP dealer. Heat caused by friction from scratching or other such means. Press the key to put your register in the VOID mode.
  • Page 4: Drawer Handling

    Remove the paper jam. Check for and remove any shreds of paper that may remain in the printer. Be sure to use paper rolls specifi ed by SHARP. Reset the paper roll correctly by following the steps in “Installing the paper rolls”.

This manual is also suitable for:

Er-a421