Setting The Communication Starting Speed; Setting The Reception Speed - Kyocera FaxSystem(M) Service Manual

Maintenance
item No.
U630 2. Select the item to be set.
(cont.)
Display
TX SPEED
RX SPEED
TX ECHO
RX ECHO
The screen changes to the submenu for making settings.
The port that is addressed by U698 is displayed when the optional dual FAX is installed.
The current settings are highlighted. If the optional dual FAX has been installed and if U698 is set to
[ALL] and settings for ports 1 and 2 are not identical, the display is not highlighted.

Setting the communication starting speed

Sets the initial communication speed when starting transmission. When the destination unit has V.34 capabil-
ity, V.34 is selected for transmission, regardless of this setting.
1. Select the setting.
Display
14400bps/V17
9600bps/V29
4800bps/V27ter
2400bps/V27ter
2. Press the start key. The setting is set.

Setting the reception speed

Sets the reception speed that the sender is informed of using the DIS or NSF signal. When the destination
unit has V.34 capability, V.34 is selected, regardless of the setting.
1. Select the setting.
Display
14400bps
9600bps
4800bps
2400bps
2. Press the start key. The setting is set.
Setting the waiting period to prevent echo problems at the sender
Sets the period before a DCS signal is sent after a DIS signal is received. Used when problems occur due to
echoes at the sender.
1. Select the setting.
Display
500
300
2. Press the start key. The setting is set.
Setting the waiting period to prevent echo problems at the receiver
Sets the period before an NSF, CSI or DIS signal is sent after a CED signal is received. Used when problems
occur due to echoes at the receiver.
1. Select the setting.
Display
500
75
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the communication starting speed.
Sets the reception speed.
Sets the waiting period to prevent echo problems at the sender.
Sets the waiting period to prevent echo problems at the receiver.
Description
V.17, 14400 bps
V.17, 9600 bps
V.27ter, 4800 bps
V.27ter, 2400 bps
Description
V.17, V.33, V.29, V.27ter
V.29, V.27ter
V.27ter
V.27ter (fallback only)
Description
Sends a DCS 500 ms after receiving a DIS.
Sends a DCS 300 ms after receiving a DIS.
Description
Sends an NSF, CSI or DIS 500 ms after receiving a CED.
Sends an NSF, CSI or DIS 75 ms after receiving a CED.
3KH-2
1-3-13