Panasonic SA-NC9GC Service Manual page 62

SA-NC9GC / SA-NC9GS / SA-NC9GCS / SA-NC9GN
Step 3 Hook the drive arm hanging area over the tray slider
and tray.
10.15.2. Disassembly of CD Loading Section
Step 1 Spead the tabs at the both sides and push out the drive
arm.
Step 3 Release the 2 tabs and remove the guide piece (L).
Step 4 Push the tray.
Step 5 Make sure that the tray and the drive arm move
smoothly.
Step 4 Release the 2 tabs and remove the guide piece (R).
Step 5 Remove horizon lock lever spring hooking area.
Step 6 Remove the tab and remove the horizon lock lever.
Step 7 Hook the lock lever spring on the lock lever projection
part temporary.
62